trinityamps.com

Trinity Amps Guitar Amp Forum
It is currently Thu Oct 31, 2024 7:29 pm

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 6 posts ] 
Author Message
 Post subject: Tweed kit completed
PostPosted: Tue Apr 05, 2016 11:47 am 
Offline

Joined: Tue Apr 05, 2016 11:41 am
Posts: 4
I bought my Tweed kit about a year ago.

The project was delayed due to kids graduating, moving to different cities (one to Calgary, the other to London, ON), etc... life happens.
I built the kit at the beginning of March this year. My first amp kit. The instructions were terrific, especially the heater wiring how-to and grounding.

I made a few minor errors - placement of some to the resistors - but got it straightened out.

+++

WOW

This amp is quiet for background hum.... loud as beejeezus when you drive it. I put it in an old cab (mahogany and old as the hills) along with a vintage USA made C12N Jensen (pulled from my Leslie cabinet). Gets me right into 'Cinnamon girl" tone! I played with the controls as I've never had a 5E3.... set tone @ 9 - the "used" channel vol at 7 and the unused channel vol at zero. Smooth power tube distortion - lovely stuff.

And of course it really cleans up for glassy tone. Lots and lots of bass.

This is a fine kit for the money, I'm very happy. :mrgreen:

Ian
(Winnipeg, Canada)


Top
 Profile  
 
 Post subject: Re: Tweed kit completed
PostPosted: Tue Apr 05, 2016 7:35 pm 
Offline
Holy Ghost
Holy Ghost
User avatar

Joined: Sun Mar 13, 2005 4:10 pm
Posts: 7519
Location: Canada
Thanks for your comment Ian. Better late than never!!

_________________
Stephen
Web: www.trinityamps.com. Facebook: facebook.com/trinityamps. Twitter: @trinityamps


Top
 Profile  
 
 Post subject: Re: Tweed kit completed
PostPosted: Wed Apr 06, 2016 11:57 am 
Offline

Joined: Tue Apr 05, 2016 11:41 am
Posts: 4
Here are a few gut shots:

Populating the board. With a couple of mistakes on resistors - perhaps you can spot the problem children!
Image

Heater wiring and power section. I had to redo the fuse solder work, it wasn't the best. The picture quality is poor, my apologies.
Image

More of the board. I did most of this over the course of a couple of evenings. Very enjoyable.
Image

I will get a few pics of the temporary cabinet/speaker combo that I'm using.


Top
 Profile  
 
 Post subject: Re: Tweed kit completed
PostPosted: Wed Apr 06, 2016 12:33 pm 
Offline
Holy Ghost
Holy Ghost
User avatar

Joined: Sun Mar 13, 2005 4:10 pm
Posts: 7519
Location: Canada
Once you get the resistors sorted out and check everything and the leads are attached, be sure to fill those eyelets with solder for mechanical integrity.

_________________
Stephen
Web: www.trinityamps.com. Facebook: facebook.com/trinityamps. Twitter: @trinityamps


Top
 Profile  
 
 Post subject: Re: Tweed kit completed
PostPosted: Thu Apr 07, 2016 2:58 pm 
Offline

Joined: Tue Apr 05, 2016 11:41 am
Posts: 4
Yep - all done. I redid them all.

I should've got on this kit a lot earlier... kind of embarrassed that it sat for a year. :oops:


Top
 Profile  
 
 Post subject: Re: Tweed kit completed
PostPosted: Fri Apr 08, 2016 3:22 pm 
Offline
Holy Ghost
Holy Ghost
User avatar

Joined: Sun Mar 13, 2005 4:10 pm
Posts: 7519
Location: Canada
Bottom line is you got it done and you love it!

_________________
Stephen
Web: www.trinityamps.com. Facebook: facebook.com/trinityamps. Twitter: @trinityamps


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 21 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group