trinityamps.com

Trinity Amps Guitar Amp Forum
It is currently Thu Mar 28, 2024 10:38 am

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 6 posts ] 
Author Message
PostPosted: Tue Aug 25, 2015 3:59 pm 
Offline
Friend
Friend

Joined: Wed Feb 11, 2015 5:55 pm
Posts: 17
Location: frozen northern Minnesota
I am putting togeather plexi-V6 Trinity kit. Great stuff! I'm wondering if anyone sees a problem with mounting the terminal strip that goes to the back screw on V1, (the one next to the wall) in the open space between V1 socket and the componet main board. It is such a tight fit when it is in the back corner. I have it kind of cocked off to one side now and I could use it this way but I don't see a problem with mounting with new hole and screw out in front off to the wall side. Any problem with noise or any other issues. Any thoughts will be appreciated


Top
 Profile  
 
PostPosted: Tue Aug 25, 2015 8:38 pm 
Offline
Friend
Friend

Joined: Mon Sep 17, 2012 10:06 pm
Posts: 49
I thought about drilling a new hole too.... It is such a tight spot to put the two inputs... with the 3 resistors and capacitor per input... and you need to watch that you do not ground anything when you put the mounting bolt through the hole as well.. I shortened my bolt to make it just long enough to clear the blind nut without going near the wires from the components... I think on the next build i will move the terminal strip out of the corner....


Top
 Profile  
 
PostPosted: Tue Aug 25, 2015 10:50 pm 
Offline
Friend
Friend

Joined: Wed Feb 11, 2015 5:55 pm
Posts: 17
Location: frozen northern Minnesota
Thanks for the reply, any thoughts on electrical noise issues. I was hoping the Holy Ghost might have a some idea about this also, will wait for him to look in on the forum


Top
 Profile  
 
PostPosted: Wed Aug 26, 2015 5:56 pm 
Offline
Expert
Expert
User avatar

Joined: Sun Feb 17, 2008 4:47 pm
Posts: 960
Location: Toronto, Canada.
You won't have noise issues.

Keep your lead dress neat, wires short and you'll be fine. Try to get the grid stopper resistors as close to the tube socket as you can.

_________________
http://pdfelectronics.com


Top
 Profile  
 
PostPosted: Wed Aug 26, 2015 11:36 pm 
Offline
Friend
Friend

Joined: Wed Feb 11, 2015 5:55 pm
Posts: 17
Location: frozen northern Minnesota
Thanks for the reply, I also wondered about the sheilded wire to V2 alot of people run it over the comp board, can you run it under the board with no issues


Top
 Profile  
 
PostPosted: Sun Jul 22, 2018 10:06 pm 
Offline
Experienced
Experienced

Joined: Fri Jul 29, 2005 11:35 pm
Posts: 424
Location: S of Buffalo, NY
SPAM!!


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 15 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group