trinityamps.com

Trinity Amps Guitar Amp Forum
It is currently Thu Oct 31, 2024 7:41 pm

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 5 posts ] 
Author Message
 Post subject: VRM sanity check
PostPosted: Sun Jul 06, 2014 11:39 pm 
Offline
Friend
Friend

Joined: Tue Apr 08, 2014 4:28 pm
Posts: 17
Location: Ohio
Hey gang,

So I've got the VRM installed and it seems to be working. Plenty loud when full up and most definitely quiets down when lowered. I didn't write down the B+ voltages but I think 350-ish down to less than 100 (IIRC). My question is this - should the amp clean up at lower voltages? I would think that at lower voltages the amp would distort sooner, but I'm seeing the opposite. For example - to get the same breakup with the volume at 3-4, VRM full on I have to turn the volume up to 9-10 if the VRM is all the way down. Is that how it's supposed to work? Also the distortion at lower voltages seems a little...blatty? Hard to describe but it's not very smooth and I find myself picking a lot harder.

Whatcha think? Did I break it? :)


Attachments:
File comment: VRM install
VRM1.jpg
VRM1.jpg [ 265.38 KiB | Viewed 6919 times ]
File comment: Caps and 1M
VRM2.jpg
VRM2.jpg [ 87.94 KiB | Viewed 6919 times ]

_________________
~fredster
Top
 Profile  
 
 Post subject: Re: VRM sanity check
PostPosted: Mon Jul 07, 2014 5:48 pm 
Offline
Expert
Expert
User avatar

Joined: Sun Feb 17, 2008 4:47 pm
Posts: 960
Location: Toronto, Canada.
Tone shouldn't change much with the VRM installed.

What's your min and max B+? Do those 1M grid leak have a good ground point?

_________________
http://pdfelectronics.com


Top
 Profile  
 
 Post subject: Re: VRM sanity check
PostPosted: Mon Jul 07, 2014 7:17 pm 
Offline
Friend
Friend

Joined: Tue Apr 08, 2014 4:28 pm
Posts: 17
Location: Ohio
Thanks for the reply! With a JJ 5Y3 I get 356 down to 78. The ground points are grounding lugs on the tube socket, and they pass a continuity check up to the resistor lead. One thing I did notice though, may not mean anything, but the voltage on the filter caps drop very quickly when I turn it off. Whether I unplug it, turn off the power or just the standby, the voltage drops from 358 down to less than 5 in seconds.

_________________
~fredster


Top
 Profile  
 
 Post subject: Re: VRM sanity check
PostPosted: Mon Jul 07, 2014 10:06 pm 
Offline
Friend
Friend

Joined: Tue Apr 08, 2014 4:28 pm
Posts: 17
Location: Ohio
Hey, I think I got it! While I was in there looking around I turned the amp off and back on, heard a bzzzap and there was the most lovely smell of electricity and fizzled dreams. :lol: I also saw some arcing on the VRM board on the B+ In terminal. I re-soldered the connection, checked all the voltages again and it's all good! The breakup level is consistent throughout the range of the VRM, and it sounds great!

_________________
~fredster


Top
 Profile  
 
 Post subject: Re: VRM sanity check
PostPosted: Wed Jul 09, 2014 7:20 pm 
Offline
Holy Ghost
Holy Ghost
User avatar

Joined: Sun Mar 13, 2005 4:10 pm
Posts: 7519
Location: Canada
I'd say you got lucky the VRM is still working. takes a lickin' and. Keeps on tickin' !

sounds like it's working properly now. It can get 'Blatty' at really, really low voltage though.

_________________
Stephen
Web: www.trinityamps.com. Facebook: facebook.com/trinityamps. Twitter: @trinityamps


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 5 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 18 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group