trinityamps.com

Trinity Amps Guitar Amp Forum
It is currently Thu Mar 28, 2024 9:00 am

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 9 posts ] 
Author Message
 Post subject: J-Rock's TRIWATT
PostPosted: Fri Feb 15, 2013 7:49 pm 
Offline
Experienced
Experienced
User avatar

Joined: Wed Feb 28, 2007 9:32 pm
Posts: 153
Location: Hubley, Nova Scotia
Hey all.

Been working more on the Forum than on amps for the past couple of years. However, I just fired up my TRIWATT build today. I'd publish the pictures, but I'd bring shame to right angled wiring folks everywhere. Anyway, I have some sound coming out of the speaker, and I can hear changes when I vary every pot, so quite a bit is going right for me. However, I don't have any input audio at the speaker end. Chopsticking yielded no loose connections. Anyway, here are my voltages. Can my V3 and v4 are the biggest discrepancies from the published numbers, in some cases double the values.
Code:
Tube   Pin 1   Pin 2   Pin 3   Pin 4   Pin 5   Pin 6   Pin 7   Pin 8
V1     116   0   1.05    x    x   100   0   0.7
V2   150   0   1.14    x    x   68.1   0   1.2
V3   222   130   130    x    x   130   0   130
V4   147.2   130   130    x    x   194.4   103   130
V5    x    x   438   495   36   356    x   1.6
V6    x    x   438   404   36   36    x   1.6

J-Rock


Top
 Profile  
 
 Post subject: Re: J-Rock's TRIWATT
PostPosted: Fri Feb 15, 2013 11:33 pm 
Offline
Holy Ghost
Holy Ghost
User avatar

Joined: Sun Mar 13, 2005 4:10 pm
Posts: 7519
Location: Canada
Check the grounding for those two tube cathodes.

_________________
Stephen
Web: www.trinityamps.com. Facebook: facebook.com/trinityamps. Twitter: @trinityamps


Top
 Profile  
 
 Post subject: Re: J-Rock's TRIWATT
PostPosted: Sat Feb 16, 2013 5:44 pm 
Offline
Experienced
Experienced
User avatar

Joined: Wed Feb 28, 2007 9:32 pm
Posts: 153
Location: Hubley, Nova Scotia
Hey Coco, which pins of the tubes are the cathodes?

BTW, I poked around some more, did continuity tests all over the place and things seemed fine. I can hear sounds come out of the speaker when I poke around the thing and, depending on the settings, I can hear sound when I chopstick the caps on the v1, v2 end of the board. Still nothing from the inputs themselves and I HAVE double checked connections and continuity on those jacks.


Top
 Profile  
 
 Post subject: Re: J-Rock's TRIWATT
PostPosted: Sat Feb 16, 2013 5:47 pm 
Offline
Expert
Expert
User avatar

Joined: Sun Feb 17, 2008 4:47 pm
Posts: 960
Location: Toronto, Canada.
J-Rock wrote:
Hey Coco, which pins of the tubes are the cathodes?

BTW, I poked around some more, did continuity tests all over the place and things seemed fine. I can hear sounds come out of the speaker when I poke around the ping and, depending on the settings, I can hear sound when I chopstick the caps on the v1, v2 end of the board. Still nothing from the inputs themselves and I HAVE double checked connections and continuity on those jacks.

Pins 3 and 8

Check all your jumpers!

_________________
http://pdfelectronics.com


Top
 Profile  
 
 Post subject: Re: J-Rock's TRIWATT
PostPosted: Sun Feb 17, 2013 12:46 am 
Offline
Holy Ghost
Holy Ghost
User avatar

Joined: Sun Mar 13, 2005 4:10 pm
Posts: 7519
Location: Canada
So when you plug is cable, there is continuity from the tip to the 68k grid resistor on v1?

_________________
Stephen
Web: www.trinityamps.com. Facebook: facebook.com/trinityamps. Twitter: @trinityamps


Top
 Profile  
 
 Post subject: Re: J-Rock's TRIWATT
PostPosted: Sun Feb 17, 2013 8:46 am 
Offline
Experienced
Experienced
User avatar

Joined: Wed Feb 28, 2007 9:32 pm
Posts: 153
Location: Hubley, Nova Scotia
Yup! If I plug into the Link there is to both of them, and on the other side of the resister, i read 68k. I'll keep looking.


Top
 Profile  
 
 Post subject: Re: J-Rock's TRIWATT
PostPosted: Sun Feb 17, 2013 10:10 am 
Offline
Holy Ghost
Holy Ghost
User avatar

Joined: Sun Mar 13, 2005 4:10 pm
Posts: 7519
Location: Canada
coco wrote:
Check the grounding for those two tube cathodes.


We're these grounded ok? High voltages often mean a problem with a cathode ground.

_________________
Stephen
Web: www.trinityamps.com. Facebook: facebook.com/trinityamps. Twitter: @trinityamps


Top
 Profile  
 
 Post subject: Re: J-Rock's TRIWATT
PostPosted: Mon Feb 18, 2013 7:00 am 
Offline
Experienced
Experienced
User avatar

Joined: Wed Feb 28, 2007 9:32 pm
Posts: 153
Location: Hubley, Nova Scotia
I checked pins 3 and 8 for continuity, and everyting appears okay. I found and fixed a bad connection at the star ground near the PT I can now actually hear a guitar signal coming out of the speaker, though with the amp dimed, I have to put my ear right to the speaker to hear it. The base noise level sounds right for a dimed amp with the overdrive on and dimed, however just a miniscule guitar signal.


Top
 Profile  
 
 Post subject: Re: J-Rock's TRIWATT
PostPosted: Mon Feb 18, 2013 11:35 am 
Offline
Expert
Expert
User avatar

Joined: Sun Feb 17, 2008 4:47 pm
Posts: 960
Location: Toronto, Canada.
How about posting some detailed pictures of the build? That would help a lot.

_________________
http://pdfelectronics.com


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 9 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 10 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group