Our Tramp kit has been tested, played, gigged and recorded and it's proving to be a real winner. With interchangeable power tube capability (6V6 (included), 6L6, KT66 and EL34), built in VRM (DC power level control) and all the control you'd need, it's a steal
at $400 USD. This is an amp that is far more than a practice amp. It's comfortable at home, on stage or in the studio.
Specs HereEverything is included in the kit to build a working amp, including tubes.
Shipping $30 USD in North America. Canadian customers pay appropriate taxes.Features:
*
All components
*
Carbon Film + Carbon Composition resistors
*
Cliff and Switchcraft jacks
*
Alpha and Bourns pots
*
Mallory/ETR Metal Poly coupling caps
*
Belton tube sockets; tube retainer & shield
*
GP03 material
1/8" thick Eyelet Board
*
JJ 6V6 and 12AX7 tubes
*
Heyboer 550V 120/230 V custom power transformer
*
Heyboer custom output transformer with 5K/2.5K primaries (6V6, 6L6, KT66, EL34)
*
All 22 gauge hook-up wire; 22 gauge pre-twisted heater wire
All Mounting hardware, spacers and nuts.
*Front faceplate
Mirrored Aluminum with White silk screened lettering.
*CNC Punched 0.06" Aircraft Aluminum Chassis with
tapped holes for tube mounting screws.
*
Detailed Assembly guide
*large
11" X 17" size layout and schematic drawings
*real
Support This kit can be built by first time builders. It is more complicated than a Champ - but far more rewarding. We recommend that you become familiar with schematics, layouts and soldering in order to assemble the board and wire up the amplifier. We also recommend that you get familiar with high voltage tube amp construction and safety.
Save yourself a lot of time and expense finding and sourcing the parts, and get a professional build as a result.
We also make custom cabinets to fit your Tramp! The chassis from June 2013 will DROP INTO a standard Tweed 112 combo cabinet.
Email
stephen@trinityamps.com