trinityamps.com

Trinity Amps Guitar Amp Forum
It is currently Wed Oct 09, 2024 10:25 pm

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 11 posts ] 
Author Message
PostPosted: Sun Jan 09, 2022 1:01 pm 
Offline

Joined: Sat Jan 01, 2022 1:38 pm
Posts: 4
Does anybody know that size female spade connector fits properly on a tone tubby red 10" speaker?
And what size wire gauge crimps properly? I looked at making my own by cutting a speaker cables with 1/4 plugs in two. The Daddarios cable is typical, constructed with 16 AWG wire. THe female 0.205" connectors are specified to use 18-22 AWG wire, a little tight for a 16 Gauge. Do I just snip off some of the strands to make it fit?


The cable:
https://smile.amazon.com/gp/product/B00 ... 0DER&psc=1

Connector kit:
https://smile.amazon.com/gp/product/B07 ... 750L&psc=1


Or alternatively, is there something off the shelf that goes from the 1/4 jack in the head to the speaker lugs in the cabinet?

Thank you all,
Peter


Top
 Profile  
 
PostPosted: Sun Jan 09, 2022 10:11 pm 
Offline
Experienced
Experienced

Joined: Sat Sep 25, 2010 3:04 pm
Posts: 181
I had the same question regarding spade connectors a while back, and came across this at WGS. I ordered some and they work like a charm for every speaker I've used.

https://wgsusa.com/proper-size-speaker- ... ive-answer

As for the wire gauge, I suppose that depends on how long the run is to the cab. Short runs (combos, a few feet) you can probably use 20AWG no problem, even with a 50-100W head. Longer runs may require heavier gauge. But once you arrive at the cab, you can use smaller gauge.

Looking inside a Marshall 4x12 cab you will probably see 20AWG wire going from the jacks to each speaker.


Top
 Profile  
 
PostPosted: Wed Jan 12, 2022 7:24 am 
Offline

Joined: Sat Jan 01, 2022 1:38 pm
Posts: 4
I ended up buying
1. a 16AWG speaker cable: https://smile.amazon.com/gp/product/B00 ... =UTF8&th=1
2. an assortment of 14-16 AWG female spade connectors: https://smile.amazon.com/gp/product/B07 ... UTF8&psc=1

As the article noted by PharmRock above indicated, the 0.205" ones fit well. The fit is snug and they can be removed. I think the real challenge will be getting the amplifier working. I checked every connection multiple times. But despite my best efforts, it's been difficult to avoid the sixth grade sicience fair style in some of the wiring.


Top
 Profile  
 
PostPosted: Wed Jan 12, 2022 2:13 pm 
Offline
Experienced
Experienced

Joined: Sat Sep 25, 2010 3:04 pm
Posts: 181
Have you powered on the amp yet? What type of problems are you encountering?


Top
 Profile  
 
PostPosted: Fri Jan 14, 2022 7:20 pm 
Offline

Joined: Sat Jan 01, 2022 1:38 pm
Posts: 4
Powering it up is the project for the weekend. For now, I'm studying the startup guide and thinking it through. I'm getting pretty eager though...


Top
 Profile  
 
PostPosted: Fri Jan 14, 2022 8:46 pm 
Offline
Experienced
Experienced

Joined: Sat Sep 25, 2010 3:04 pm
Posts: 181
I highly recommend getting a light bulb limiter. It adds an "extra layer of protection" on start-up, and is a great visual cue if something is going or about to go wrong. Decreases likelihood of blowing a fuse, and more importantly, helps protect the transformers.
https://robrobinette.com/Tube_Amp_Startup.htm


Top
 Profile  
 
PostPosted: Sun Jan 16, 2022 6:44 pm 
Offline

Joined: Sat Jan 01, 2022 1:38 pm
Posts: 4
It's working! Sounds great!!!!
Took a little troubleshooting.


Top
 Profile  
 
PostPosted: Mon Jan 17, 2022 1:58 am 
Offline
Experienced
Experienced

Joined: Sat Sep 25, 2010 3:04 pm
Posts: 181
:thumbsup: :D


Top
 Profile  
 
PostPosted: Thu Nov 23, 2023 3:47 am 
Offline
Friend
Friend

Joined: Mon May 08, 2023 5:23 am
Posts: 10
:hmmm: :hmmm: :hmmm: :thumbsup: :D
only up


Top
 Profile  
 
PostPosted: Tue Dec 26, 2023 12:12 am 
Offline
Friend
Friend

Joined: Thu Mar 23, 2023 12:07 am
Posts: 13
RosenTube wrote:
I ended up buying
1. a 16AWG speaker cable: https://smile.amazon.com/gp/product/B00 ... =UTF8&th=1 subway surfers
2. an assortment of 14-16 AWG female spade connectors: https://smile.amazon.com/gp/product/B07 ... UTF8&psc=1

As the article noted by PharmRock above indicated, the 0.205" ones fit well. The fit is snug and they can be removed. I think the real challenge will be getting the amplifier working. I checked every connection multiple times. But despite my best efforts, it's been difficult to avoid the sixth grade sicience fair style in some of the wiring.

It worked. Many thanks!


Top
 Profile  
 
PostPosted: Fri Feb 23, 2024 12:49 am 
Offline

Joined: Tue May 09, 2023 5:34 am
Posts: 3
PharmRock wrote:
I highly recommend getting a light bulb limiter. It adds an "extra layer of protection" on start-up, and is a great visual cue if something is going or about to go wrong. Decreases likelihood of blowing a fuse, and more importantly, helps protect the transformers.
https://robrobinette.com/Tube_Amp_Startup.htm geometry dash lite

Thanks for your suggestion, where should I buy it


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 11 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group