trinityamps.com

Trinity Amps Guitar Amp Forum
It is currently Fri Mar 29, 2024 10:22 am

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 8 posts ] 
Author Message
PostPosted: Mon May 07, 2012 6:18 pm 
Offline
Friend
Friend

Joined: Tue Jan 03, 2012 8:30 pm
Posts: 22
Hi guys,

I just build my Tweed. Everything went ok. But no sound.

I'm really new at this so i don't really know how and where to measure voltages.

Could you explain how this has to be done??

I've checked and rechecked connections but the Rectifier tube simply doesn't burn. All the other 4 Tubes (2x6v6, 12ax7 and 12ay7) are glowing really good but the rectifier just won't glow. I did get 375VDC on both pins 4 and 6 of 5y3. But i dont get that 400VDC on pin8. Is the tube damaged?? How can i test if the tube is damaged??

How do i measure the other voltages? are those DC o AC?

I may borrow a 5u4 from a friend. Should i try it with one of those or wait to get another 5y3

What do you think about the cabin? Its 100% Colombian Granadillo, a South American Type of Rosewood, completely handmade with dovetail joints.


Attachments:
20120505_181725.jpg
20120505_181725.jpg [ 3.08 MiB | Viewed 7553 times ]
20120505_181733.jpg
20120505_181733.jpg [ 2.64 MiB | Viewed 7553 times ]
20120505_181820.jpg
20120505_181820.jpg [ 2.16 MiB | Viewed 7553 times ]
20120505_194342.jpg
20120505_194342.jpg [ 2.86 MiB | Viewed 7553 times ]
File comment: rectifier tube connection.
20120507_163227.jpg
20120507_163227.jpg [ 2.99 MiB | Viewed 7553 times ]
File comment: Full amp
20120507_163350.jpg
20120507_163350.jpg [ 3.47 MiB | Viewed 7553 times ]
Top
 Profile  
 
PostPosted: Thu May 10, 2012 11:13 am 
Offline
Novice
Novice

Joined: Wed Jan 30, 2008 3:34 pm
Posts: 141
Location: Manitoulin Island, Ontario
It's so hard to see where wires are going but do you have the B+ from the rectifier wired to ground? It should go to the first cap filter node.

Also, that cabinet looks amazing.


Top
 Profile  
 
PostPosted: Thu May 10, 2012 12:12 pm 
Offline
Novice
Novice

Joined: Wed Mar 30, 2011 8:39 am
Posts: 59
I agree with Cups, that cabinet is amazing.


Top
 Profile  
 
PostPosted: Wed May 23, 2012 1:25 pm 
Offline
Friend
Friend

Joined: Tue Jan 03, 2012 8:30 pm
Posts: 22
Guys,

These are my voltage readings. Some are lower than expected

384 VDC on B+
22VDC where the 250R and the 25uF meet. Same as layout
*** 50VDC instead of 70VDC*****. Where the 1k5R meets the .1uF400V and to pin 8 of V2 (12ax7)
***202VDC instead of 175VDC**** Where the 56KR meets the .1uF400V and to pin 6 of V2 (12ax7)
***160VDC instead of 167VDC**** Where the 100KR meets the .02uF600V and to 1 of V2 (12ax7)
***1.3VDC instead of 1.1VDC*** where the 1K5R meets the 25uF50V and to pin 3 of V2

The other voltages measure ok

Should I change my V2 (12ax7)??


Top
 Profile  
 
PostPosted: Wed May 23, 2012 1:32 pm 
Offline
Friend
Friend

Joined: Tue Jan 03, 2012 8:30 pm
Posts: 22
Just changed my 12ax7 tube with the one on my TRAMP. I still keep getting the same voltages. Any idea why?? I can imagine 2 tubes being broken.


Top
 Profile  
 
PostPosted: Wed May 23, 2012 1:54 pm 
Offline
Friend
Friend

Joined: Tue Jan 03, 2012 8:30 pm
Posts: 22
The really weird thing is the following....

Im getting really low volume and very opaque sounds when im plugged into the BRIGHT channel. On Normal it sound trully amazing, but when plugged into the bright channel i just get a very low volume pretty UNBright sound.

Any ideas?


Top
 Profile  
 
PostPosted: Wed May 23, 2012 2:01 pm 
Offline
Friend
Friend

Joined: Tue Jan 03, 2012 8:30 pm
Posts: 22
This is a close up pic of my inputs


Attachments:
20120523_125735.jpg
20120523_125735.jpg [ 3.06 MiB | Viewed 7446 times ]
Top
 Profile  
 
PostPosted: Wed May 23, 2012 2:45 pm 
Offline
Friend
Friend

Joined: Tue Jan 03, 2012 8:30 pm
Posts: 22
NEVER MIND GUYS..... MY STUPIDITY WAS RAPIDLY SHOWN!!!! JAJAJA

The cable from the Bright Volume Pot somehow became lose... Just soldered it and....

Holy crap it sounds good.... The voltages are still kinda weird as i posted before. But still... it sounds amazing!!!!!!!! :D

Trinity Amps rule!!!!!


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 8 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 13 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group