trinityamps.com • View topic

View unanswered posts | View active topics

Board index » On Stage » Tweed

All times are UTC - 5 hours [ DST ]

Troubleshooting..

Moderators: coco, J-Rock

Page 1 of 1

[ 10 posts ]

Previous topic | Next topic

Author

Message

Ernie R

Post subject: Troubleshooting..

Posted: Wed Feb 08, 2012 12:49 am

Friend

Joined: Wed Jun 29, 2011 6:45 pm
Posts: 48

I'm getting things going with my first Trinity 5E3 tweed build and things goin good with troubleshooting all because of howgreat you guys are....sure makes it easy on a greenhorn...

Last edited by Ernie R on Sat Apr 28, 2012 1:41 am, edited 2 times in total.

Top

kurtlives

Post subject: Re: Am I too tired or was Stephen in the sauce

Posted: Wed Feb 08, 2012 1:35 am

Expert

Joined: Sun Feb 17, 2008 4:47 pm
Posts: 960
Location: Toronto, Canada.

Works either way.

It's AC so polarity does not matter.

_________________
http://pdfelectronics.com

Top

Ernie R

Post subject: Re: Am I too tired or was Stephen in the sauce

Posted: Wed Feb 08, 2012 3:07 am

Friend

Joined: Wed Jun 29, 2011 6:45 pm
Posts: 48

Thanks Kurt..

Last edited by Ernie R on Sat Apr 28, 2012 1:42 am, edited 1 time in total.

Top

kurtlives

Post subject: Re: Am I too tired or was Stephen in the sauce

Posted: Wed Feb 08, 2012 8:45 am

Expert

Joined: Sun Feb 17, 2008 4:47 pm
Posts: 960
Location: Toronto, Canada.

No wire are going to ground. Not sure what you mean.

_________________
http://pdfelectronics.com

Top

Ernie R

Post subject: Re: Am I too tired or was Stephen in the sauce

Posted: Wed Feb 08, 2012 9:24 am

Friend

Joined: Wed Jun 29, 2011 6:45 pm
Posts: 48

you're a thoughtful and patient person kurtlives

Last edited by Ernie R on Sat Apr 28, 2012 1:44 am, edited 1 time in total.

Top

kurtlives

Post subject: Re: Am I too tired or was Stephen in the sauce

Posted: Wed Feb 08, 2012 1:25 pm

Expert

Joined: Sun Feb 17, 2008 4:47 pm
Posts: 960
Location: Toronto, Canada.

Ernie R wrote:

with a voltmeter to either of those leads and the other test lead to ground, would that not give me 6.3 vac ?

Also, how critical are Tight twists in heaters leads, and also, it's Very important to have these twisted jumpers laying against the bottom of chassis (for reduction in hum ?) Thank you..

With a voltmeter set to AC you will read 3.15V AC from ground to one of those leads.
If you measure lead to lead you will get 6.3V AC.

They should be fairly tight but I wouldn't loose sleep over their tightness and how critical it is.

Not sure which twisted jumpers your referring too.

_________________
http://pdfelectronics.com

Top

G-log

Post subject: Re: Am I too tired or was Stephen in the sauce

Posted: Wed Feb 08, 2012 1:27 pm

Experienced

Joined: Thu May 17, 2007 12:44 pm
Posts: 204
Location: Vancouver BC

The tightness of the twists are mostly a visual thing for the most part, even a really loose twist will do the trick,but it is better to err on the side of caution, the heater leads were against the chassis in the original tweeds but not twisted together. Here's a pic of a real 5e3 belonging to a friend of mine. You can see the green heater wires clearly. Every bit of attention to detail in the lead dress can be crucial as the hum issues can be cumulative.Keep the wires short and neat,but don't drive yourself crazy trying to make it perfect!

Top

Ernie R

Post subject: Re: Am I too tired or was Stephen in the sauce

Posted: Wed Feb 08, 2012 2:56 pm

Friend

Joined: Wed Jun 29, 2011 6:45 pm
Posts: 48

G-log: thank you for the photo and explanation..

Last edited by Ernie R on Sat Apr 28, 2012 1:45 am, edited 1 time in total.

Top

coco

Post subject: Re: Am I too tired or was Stephen in the sauce

Posted: Wed Feb 08, 2012 4:15 pm

Holy Ghost

Joined: Sun Mar 13, 2005 4:10 pm
Posts: 7519
Location: Canada

I not much of a sauce guy but the manual has been changed so this is no longer an issue.
thanks forthe feedback!

_________________
Stephen
Web: www.trinityamps.com. Facebook: facebook.com/trinityamps. Twitter: @trinityamps

Top

Ernie R

Post subject: Re: Am I too tired or was Stephen in the sauce

Posted: Wed Feb 08, 2012 5:08 pm

Friend

Joined: Wed Jun 29, 2011 6:45 pm
Posts: 48

I'm havin so much fun building this amp, it wouldn't be the same if this was like some of the other "clicky" forums that I'd pretty much feel like I was on my own, thankfully you guys are the greatest bunch of any of the amp forums...Especially Joey and Kurtlives..you two guys have gone out of your way to help me every step of the way..I hope you show others in life the same as you have for me...special people indeed :lol:

Top

Page 1 of 1

[ 10 posts ]

Board index » On Stage » Tweed

All times are UTC - 5 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 3 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum