trinityamps.com

Trinity Amps Guitar Amp Forum
It is currently Thu Mar 28, 2024 11:13 am

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 6 posts ] 
Author Message
PostPosted: Mon Oct 24, 2022 2:30 am 
Offline
Friend
Friend

Joined: Fri Jun 11, 2021 12:58 pm
Posts: 21
Anybody know what's going with these connections (highlighted in yellow)? It looks like the wires are spliced but I don't see that mentioned in the manual.

Also, for the volume pots, what's the green wire? That doesn't seem to match the drawing.

UPDATE: I'm assuming the green wire is just a different way to ground those components from how it's shown on the drawing, so I'm following the drawing.


Attachments:
File comment: What's going on here? Looks like wire is spliced and one splice is connected to the ground bus. The build pic doesn't seem to match though.
Ch 1 Vol.JPG
Ch 1 Vol.JPG [ 19.06 KiB | Viewed 2855 times ]
Ch 1 Input.JPG
Ch 1 Input.JPG [ 17.22 KiB | Viewed 2855 times ]
Ch 2 Vol.JPG
Ch 2 Vol.JPG [ 13.01 KiB | Viewed 2855 times ]
Ch 2 Input.JPG
Ch 2 Input.JPG [ 18.74 KiB | Viewed 2855 times ]
File comment: Green wire doesn't match drawing. Which do I follow?
Volume Pots.JPG
Volume Pots.JPG [ 72.44 KiB | Viewed 2855 times ]


Last edited by jeesh999 on Fri Oct 28, 2022 2:33 pm, edited 2 times in total.
Top
 Profile  
 
 Post subject: Re: Connection questions
PostPosted: Tue Oct 25, 2022 3:03 pm 
Offline
Experienced
Experienced

Joined: Fri Jul 29, 2005 11:35 pm
Posts: 424
Location: S of Buffalo, NY
The thick dark lines should be coax / shielded cable. the lines you are referencing is the shield braid / ground connection that should be done only at one end of the shielded cable.
The manual should show you how to prepare the shield for soldering.


Top
 Profile  
 
 Post subject: Re: Connection questions
PostPosted: Wed Oct 26, 2022 12:27 pm 
Offline
Friend
Friend

Joined: Fri Jun 11, 2021 12:58 pm
Posts: 21
jcny wrote:
The thick dark lines should be coax / shielded cable. the lines you are referencing is the shield braid / ground connection that should be done only at one end of the shielded cable.
The manual should show you how to prepare the shield for soldering.


Thanks so much for the reply. I did see the info about the coax in the manual and started to make the "connection" with the drawing. Wish the pics showed more detail about what the end result should look like.


Top
 Profile  
 
PostPosted: Tue Nov 01, 2022 3:05 pm 
Offline
Experienced
Experienced

Joined: Fri Jul 29, 2005 11:35 pm
Posts: 424
Location: S of Buffalo, NY
glad I could help


Top
 Profile  
 
 Post subject: Re: Connection questions
PostPosted: Thu Sep 07, 2023 2:55 am 
Offline
Friend
Friend

Joined: Mon May 08, 2023 5:23 am
Posts: 10
jcny wrote:
The thick dark lines should be coax / shielded cable. the lines you are referencing is the shield braid / ground connection that should be done only at geometry dash one end of the shielded cable.
The manual should show you how to prepare the shield for soldering.

Is there a simpler way? I've looked at the instructional book, but I still can't do it.


Top
 Profile  
 
PostPosted: Wed Mar 27, 2024 8:02 am 
Offline

Joined: Fri Mar 22, 2024 10:25 am
Posts: 5
It's essential to follow the manual closely for proper wiring and energy. If unsure, consulting with the manufacturer or seeking advice from experienced builders can help resolve any discrepancies.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 21 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group