trinityamps.com

CUSTOM TRIWATT LEAD kits are now shipping.

Trinity Amps has been providing Guitar Amp kits since and relieving G.A.S. since 2004. What differentiates our kits from others is part quality, fit, documentation and support.

Key points about the Design:

* Big Hiwatt DR clean tones and breakup at more ear-friendly levels
* Vintage style early '70s 103 preamp (with cathode-follower)
* Three-inputs - Normal, Bright and Link, like Dave Gilmour's 3-input amps
* Switchable 80s' "Biacrown era" high-gain OL/Lead mode, with Overdrive control
* Early Hiwatt style 12AT7 phase invertor, with 12AX7 option for increased drive
* Solid State rectified, fixed-bias, 22 Watt 6V6 power stage, based closely on Hiwatt original
* 6V6 or KT66 operation with External Bias Switch, Bias Control and Test Points
* Transformers closely based on original Hiwatt Partridge transformers for definitive tone.
* Compact physical format and cabinet - chassis also fits other standard cabs

Options:

* SOZO Mustard cap upgrade (1-.01, 2-.022, 5-.047, 2-.1) - $25
* Foot switch upgrade for OL/Lead modes - $50 (Regulated power supply & relay board, jack, no footswitch)



The Kit Features:

* HEYBOER Custom Partridge design Transformers
* MALLORY 150 caps
* 1 Watt CARBON FILM resistors; Metal film where required for low noise
* CLIFF jacks
* ALPHA pots
* JJ filter cap
* BELTON Micalex tube sockets. Tube retainers & shields
* 1/8" thick GP03 Turret Board with large size KEYSTONE Turrets
* CARLING progressive Power switch; LORLIN impedance switch
* 20 gauge hook-up Wire; BELDEN Co-Ax cable
* All Mounting hardware, spacers and nuts
* Front Black faceplate with White lettering with 3 Inputs
* Pre-Cut 0.08" Aircraft ALUMINUM Chassis with tapped holes for tube mounting screws and silk screened rear face
* Detailed Assembly guide with large 11" X 17" size layout and schematic drawings
* Real SUPPORT.



The TRIWATT CUSTOM LEAD head kit is $600 USD plus $30 shipping in North America.

We don’t think there is a better offer available for the quality of this kit and tone of this amp.
Chassis 20"w X 6.5"d X 2.5"h) and requires 18" X 2.25" cabinet cut-out.
Applicable Canadian taxes apply.

Order a Matching TRIWATT Head Cabinet (23"w X 8.5"d X 8"h) and get a 5% dicsount on the cabinet!

---------------------------
Also When Available
Transformer set - $210 USD $25 shipping
Power Transformer - $140
Output Transformer - $130
Chassis with faceplate - $100 USD $20 shipping
Turret board - $40USD $10 shipping
Progressive power switch - $10 USD

Chassis is 20" X 6.5" X 2.5" .090 Aluminum

well tie me up and call me Nancy!


Now if every Trinity amps owner would tell two friends.. and they tell two friends..... you would be in trouble!

Cant wait!

AJC

Nancy - Check out the options!

Nancy saw them!!!!, she forgot to tell Betsy!

AND ALL, mine's coming, what about yours, huh

Betsy, Betsy !! Where are ya baby!
So I'm strange, sue me, lol!!!

All the parts are expected for launch, March 27th. We are experiencing delays with Sozo caps though.

Power Transformer



Power is same size as the OT. HV 345-0-345 to 180mA for a little extra beef. 6.3 CT is at 4A


Partridge Design 8K Transformer



OT Specs:

The OT is really close to a Partridge on file that was torn down by Heyboer. It's built how the Partridge was set with the same interleave and hook up. The original is a very involved winding with 4 primary sections and 3 secondary sections. Our version is nicknamed "EZ" as it's marginally simplier construction.

29 guage M-6 laminations that are the same size lams as original.
4-8-16 0hm outputs

Both transformers are the same size. In stand up, it will be tall way up 3 3/4" H X 3 1/8" W and 1 1/2" Plus the brackets, which are about 1/2" out on each side.

When available, they cost $210 USD per set + $20 shipping/handling in North America.

oh man, they're so beautiful!
All they need is some cases, lol I had too!

Added new footswitch option for $50

Added price for Transformer Sets.