trinityamps.com

Trinity Amps Guitar Amp Forum
It is currently Thu Oct 31, 2024 7:27 pm

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 7 posts ] 
Author Message
 Post subject: DPDT Pots for SIIIV6?
PostPosted: Sun Jul 15, 2007 8:03 am 
Offline
Friend
Friend
User avatar

Joined: Wed Oct 25, 2006 8:27 pm
Posts: 19
Location: O-H-I-O
I have the sIIIv6 and was considering putting the boost and
6V6/EL84 switches on the front of the amp using push-pull pots. Would this create issues with the layout? Would the amp be noisy?


Top
 Profile  
 
 Post subject:
PostPosted: Mon Jul 16, 2007 1:37 pm 
Offline
Holy Ghost
Holy Ghost
User avatar

Joined: Sun Mar 13, 2005 4:10 pm
Posts: 7519
Location: Canada
I dont think it would be a problem as long as the leads were twisted and not too far from the components they connect to.

_________________
Stephen
Web: www.trinityamps.com. Facebook: facebook.com/trinityamps. Twitter: @trinityamps


Top
 Profile  
 
 Post subject:
PostPosted: Mon Jul 16, 2007 4:20 pm 
Offline
Friend
Friend
User avatar

Joined: Wed Oct 25, 2006 8:27 pm
Posts: 19
Location: O-H-I-O
OK...thanks, Stephen. May give this a try!


Top
 Profile  
 
 Post subject:
PostPosted: Wed Jul 18, 2007 9:29 pm 
Offline
Friend
Friend
User avatar

Joined: Wed Oct 25, 2006 8:27 pm
Posts: 19
Location: O-H-I-O
Tried this out today. I replaced the bass pot on the TMB channel (it is directly across from the 6V6 tubes) with a 500K audio taper pot with a DPDT switch (like you might find in a coil tap guitar). Wired it up to switch between the EL84s and 6V6s, 6V6s when pulled out. Twisted the wires as you suggested and kept everything as short as possible. No problems! Nice and quiet, just like before! I did this mod first because I thought it might be noisier and I am switching output tubes more than using the boost option.


Top
 Profile  
 
 Post subject:
PostPosted: Thu Jul 19, 2007 11:10 am 
Offline
Holy Ghost
Holy Ghost
User avatar

Joined: Sun Mar 13, 2005 4:10 pm
Posts: 7519
Location: Canada
oxfordmini wrote:
Tried this out today. I replaced the bass pot on the TMB channel (it is directly across from the 6V6 tubes) with a 500K audio taper pot with a DPDT switch (like you might find in a coil tap guitar). Wired it up to switch between the EL84s and 6V6s, 6V6s when pulled out. Twisted the wires as you suggested and kept everything as short as possible. No problems! Nice and quiet, just like before! I did this mod first because I thought it might be noisier and I am switching output tubes more than using the boost option.


Great idea!! Glad it worked out for you. What part [& what source] did you use for the pot?

_________________
Stephen
Web: www.trinityamps.com. Facebook: facebook.com/trinityamps. Twitter: @trinityamps


Top
 Profile  
 
 Post subject:
PostPosted: Thu Jul 19, 2007 3:10 pm 
Offline
Friend
Friend
User avatar

Joined: Wed Oct 25, 2006 8:27 pm
Posts: 19
Location: O-H-I-O
I tried finding them from Mouser and Digikey, but all I could find were linear taper ones. The ones in Fender amps seem to be of the 1M variety. Many of the guitar parts suppliers have them, just don't know where they are getting them. I probably just haven't been diligent enough in looking online...they gotta be out there. I hate to pay the markup if I can avoid it. The thought came to me as I was working on a friend's amp with a pull boost :idea: - the part came to me as I replaced the electronics in my PRS McCarty :o .


Top
 Profile  
 
PostPosted: Sun Jan 13, 2019 5:22 pm 
Offline
Friend
Friend
User avatar

Joined: Wed Oct 25, 2006 8:27 pm
Posts: 19
Location: O-H-I-O
Thread back from the dead! I'm working on this amp tidying up a few things before it goes in a 1x12 combo cab. I noticed the 220K resistors on the cathode switch on the more recent layouts for the V6. What's the benefit? My build back in 2007 didn't have them.

While I'm at it, Coco, would you favor the TT Alnico or TT Ceramic in the 1x12 combo configuration?


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 7 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 51 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group