trinityamps.com

Trinity Amps Guitar Amp Forum
It is currently Thu Mar 28, 2024 4:11 am

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 14 posts ] 
Author Message
 Post subject: Tube question
PostPosted: Wed Feb 27, 2019 7:09 pm 
Offline
Novice
Novice

Joined: Sun Feb 13, 2011 9:41 pm
Posts: 91
Location: Ontario, Canada
I’ve got a pair of mid sixties Siemens E84L tubes. Are they a safe substitute for an EL84 in my 18 watt? I know they are rated for higher plate voltages; not an issue in my amp as it only runs about 338 VDC. Just want to make sure they don’t draw too much current.


Top
 Profile  
 
 Post subject: Re: Tube question
PostPosted: Fri Mar 01, 2019 8:03 pm 
Offline
Experienced
Experienced
User avatar

Joined: Wed Aug 26, 2009 11:27 pm
Posts: 273
Location: Ontario
shouldn.t be a problem.


Top
 Profile  
 
 Post subject: Re: Tube question
PostPosted: Sat Mar 02, 2019 10:12 am 
Offline
Novice
Novice

Joined: Sun Feb 13, 2011 9:41 pm
Posts: 91
Location: Ontario, Canada
Ok, thanks.


Top
 Profile  
 
 Post subject: Re: Tube question
PostPosted: Mon Mar 04, 2019 3:06 pm 
Offline
Friend
Friend

Joined: Thu Aug 16, 2018 10:53 pm
Posts: 38
moved


Top
 Profile  
 
 Post subject: Re: Tube question
PostPosted: Fri Mar 08, 2019 11:08 am 
Offline
Friend
Friend

Joined: Thu Aug 16, 2018 10:53 pm
Posts: 38
Does anyone here have experience with 6P14P (Russian EL84) power tubes? I have seen some high praise for the 6P14P-EV on other forums.


Top
 Profile  
 
 Post subject: Re: Tube question
PostPosted: Sat Mar 09, 2019 2:02 pm 
Offline
Experienced
Experienced

Joined: Fri Jul 29, 2005 11:35 pm
Posts: 424
Location: S of Buffalo, NY
Been using some older Russian military surplus 6P14P''s in my sIII for years. Very robust and sound good, similar to regular EL84's but supposed to last much longer.


Top
 Profile  
 
 Post subject: Re: Tube question
PostPosted: Mon Mar 11, 2019 9:36 am 
Offline
Friend
Friend

Joined: Thu Aug 16, 2018 10:53 pm
Posts: 38
jcny wrote:
Been using some older Russian military surplus 6P14P''s in my sIII for years. Very robust and sound good, similar to regular EL84's but supposed to last much longer.

Good to know. I have a pair of 6P14P-EV's in route from the Ukraine. Will post impressions after I get a chance to try them out.


Top
 Profile  
 
 Post subject: Re: Tube question
PostPosted: Tue Mar 12, 2019 1:29 pm 
Offline
Novice
Novice

Joined: Sun Feb 13, 2011 9:41 pm
Posts: 91
Location: Ontario, Canada
Attachment:
3DDFF65A-39A3-4020-BAB8-148176CDC255.jpeg
3DDFF65A-39A3-4020-BAB8-148176CDC255.jpeg [ 2.72 MiB | Viewed 8910 times ]
Attachment:
8B7863AD-5EE9-44A7-A6E1-4F98930CDA15.jpeg
8B7863AD-5EE9-44A7-A6E1-4F98930CDA15.jpeg [ 3.56 MiB | Viewed 8910 times ]


I installed the Siemens E84L tubes today. They’re working fine in the amp and sound great. These tubes were relabeled by RTC of France. Very rugged looking tube. Great overdrive sound. I changed out all the preamp tubes a week ago or so. I found a JAN Philips 12AX7WA in my stash and a couple of old Sylvania 12AX7 tubes.


Top
 Profile  
 
 Post subject: Re: Tube question
PostPosted: Tue Mar 12, 2019 4:21 pm 
Offline
Friend
Friend

Joined: Thu Aug 16, 2018 10:53 pm
Posts: 38
Case24 wrote:
Attachment:
3DDFF65A-39A3-4020-BAB8-148176CDC255.jpeg
Attachment:
8B7863AD-5EE9-44A7-A6E1-4F98930CDA15.jpeg


I installed the Siemens E84L tubes today. They’re working fine in the amp and sound great. These tubes were relabeled by RTC of France. Very rugged looking tube. Great overdrive sound. I changed out all the preamp tubes a week ago or so. I found a JAN Philips 12AX7WA in my stash and a couple of old Sylvania 12AX7 tubes.

What were your impressions of the moving from JJ to vintage with the preamp tubes? I have a couple of NOS Amperex E83CC (6681) that I plan on giving a go at some point.

Do you have an opinion yet on the Siemens power tubes vs the TAD you were using?


Top
 Profile  
 
 Post subject: Re: Tube question
PostPosted: Tue Mar 12, 2019 7:25 pm 
Offline
Novice
Novice

Joined: Sun Feb 13, 2011 9:41 pm
Posts: 91
Location: Ontario, Canada
etzeppy wrote:
What were your impressions of the moving from JJ to vintage with the preamp tubes? I have a couple of NOS Amperex E83CC (6681) that I plan on giving a go at some point.

Do you have an opinion yet on the Siemens power tubes vs the TAD you were using?


With the preamp tubes, probably quieter (as in less noise). Maybe a little more range to the tone which could be perceived as brighter. I’d say the same for the Siemens as well. The Siemens might be a bit louder too. The new production tubes that I had in it were fine really.


Top
 Profile  
 
 Post subject: Re: Tube question
PostPosted: Fri Apr 12, 2019 4:28 pm 
Offline
Novice
Novice

Joined: Sun Feb 13, 2011 9:41 pm
Posts: 91
Location: Ontario, Canada
A very good friend of mine gave me a full set of old British Mullard ECC83 and EL84 tubes for my Plexi for my birthday this past week. You should hear this amp now! The tone is just amazing. Sweet, open clean tones and roaring Marshall crunch at the turn of the guitar’s volume knob. I love this amp.


Top
 Profile  
 
 Post subject: Re: Tube question
PostPosted: Fri Apr 12, 2019 10:24 pm 
Offline
Friend
Friend

Joined: Thu Aug 16, 2018 10:53 pm
Posts: 38
Case24 wrote:
A very good friend of mine gave me a full set of old British Mullard ECC83 and EL84 tubes for my Plexi for my birthday this past week. You should hear this amp now! The tone is just amazing. Sweet, open clean tones and roaring Marshall crunch at the turn of the guitar’s volume knob. I love this amp.

That's a good friend you have there.


Top
 Profile  
 
 Post subject: Re: Tube question
PostPosted: Sun Apr 14, 2019 7:57 am 
Offline
Holy Ghost
Holy Ghost
User avatar

Joined: Sun Mar 13, 2005 4:10 pm
Posts: 7519
Location: Canada
Case24 wrote:
A very good friend of mine gave me a full set of old British Mullard ECC83 and EL84 tubes for my Plexi for my birthday this past week. You should hear this amp now! The tone is just amazing. Sweet, open clean tones and roaring Marshall crunch at the turn of the guitar’s volume knob. I love this amp.


Lucky guy you are!

_________________
Stephen
Web: www.trinityamps.com. Facebook: facebook.com/trinityamps. Twitter: @trinityamps


Top
 Profile  
 
 Post subject: Re: Tube question
PostPosted: Sun Apr 14, 2019 4:26 pm 
Offline
Novice
Novice

Joined: Sun Feb 13, 2011 9:41 pm
Posts: 91
Location: Ontario, Canada
Yes indeed. The preamp tubes are labeled Rogers or Electrohome Canada and the El84’s are labeled Philips but they are all Blackburn, UK code tubes.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 14 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group