Good evening all! I finally was able to get my mitts on an 18 watt TMB, I'm way way beyond impressed with the quality, instructions, and support that I've received so far. Anywho...I got all the way through building the power section today and was able to fire it up for the initial power supply test. I know the voltages will be high on everything with no load and they were, as expected...however, I was just wondering how high is too high for filament voltage. I was showing 3.5 to 3.6 VAC to ground on most all of the filaments I checked. My wall voltage is 122 borderline 123. Aside from this, I was excited to fire it up initially with no smoke, fire, fumes, sparks or explosions! Looking forward to playing this beast!
|